径向载荷作用下管道挤压变形过程数值模拟

野外埋地敷设的长距离输油管道发生断裂等较大事故时,采用管道局部挤压的方式可以在较短时间内将管道快速压扁以截断流油。为设计管道挤压截流装置,运用ANSYS Workbench建立上下压头加载作用下管道挤压的有限元模型,完成对ф159 mm×5 mm的45号钢挤压变形模拟仿真,得到管道挤压的等效应力、位移分布、变形范围和载荷-位移曲线等。将模拟数据与实验数据进行对比,两者结果比较吻合,可以为管道泄漏抢修提供理论和实践参考。     

建立以消防部队为主体的社会应急救援体系

随着我国改革开放的深入和经济的快速发展,城市化、工业化进程加快,复杂火灾、危化品泄漏、工业安全生产事故、建筑物倒塌等各类灾难事故时有发生,建设应急救援体系非常迫切。阐述了建设应急救援体系的法律、政策依据及现状,分析了建立以消防部队为主体的社会应急救援体系的优势,探讨了建立以消防部队为主体的社会应急救援体系应采取的措施。     

多民族地区青少年对待欺负问题态度的比较研究

一直以来,欺负行为普遍存在于校园之中,对青少年的身心健康造成了很大的危害。因此,引起了社会各界的广泛关注。本研究利用初中生欺负/受欺负问卷对新疆少数民族和汉族的近500名初中生对待欺负问题的态度进行了调查,分析发现汉族学生对待欺负问题的态度比少数民族学生更积极;对待欺负问题的态度存在性别差异,女生比男生更积极,在对待欺负行为的态度上少数民族学生有极其显著的性别差异;少数民族学生对待欺负问题的态度与年级显著相关,而不同年级汉族学生对待欺负问题的态度差异并不显著。     

反舰导弹大空域变轨的三维扩展比例导引律

为了使大空域变轨弹道的理论研究更符合反舰导弹的实际运动状态,建立了反舰导弹追踪虚拟目标的三维空间相对运动模型。同时,为了保证反舰导弹大空域变轨弹道的四段弹道平滑过渡,在导引律设计时同时考虑了脱靶量要求和末端落角要求。应用Lyapunov稳定性理论求解出满足要求的三维扩展比例导引律,对大空域变轨弹道的四段弹道设计了相应的过载控制指令,并进行了仿真研究。仿真结果表明:所提出的三维扩展比例导引律可以使反舰导弹顺利完成大空域飞行任务,而且保证了反舰导弹的所有性能指标均满足要求。     

基于遗传算法的无线通信节点部署优化策略

根据无线通信节点部署过程中网络受到区域环境影响和电波传播损耗等实际问题,建立了考虑区域影响的信号衰减模型和无线通信网络覆盖模型,提出了一种综合考虑网络覆盖和通信干扰的优化部署策略。该策略采用了加速遗传算法,大大降低了计算量。基于该优化策略,通过仿真实验得到了特定区域的最优通信节点数和节点部署位置图。     

层次分析法在修理级别分析中的应用

修理级别的非经济性分析有多个结果时,很难确定产品的合理修理级别,若采用经济性分析,数据采集难,并且可操作性差.因此,提出用层次分析法来决断产品合理修理级别的方法,以提高修理级别分析方法的可操作性,并为其工程化提供一种思路.     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

基于深度强化学习的无人战车自主行为决策

针对高动态强对抗战场环境下,无人战车面临的自主行为决策问题,分析了未来陆战场无人战车实际作战需求,构建了基于马尔可夫决策过程的自主行为决策模型,提出了一种深度强化学习结合行为树的方法,利用行为树的逻辑规则与先验知识降低强化学习问题的难度,保证收敛性和鲁棒性,同时使行为决策模型具有学习能力.构建典型作战场景,验证深度强化学习结合行为树的无人战车自主行为决策方法的有效性.     

Effects of nano-sized aluminum on detonation characteristics and metal acceleration for RDX-based aluminized explosive

Nano-sized aluminum(Nano-Al)powders hold promise in enhancing the total energy of explosives and the metal acceleration ability at the same time.However,the near-detonation zone effects of reaction between Nano-Al with detonation products remain unclear.In this study,the overall reaction process of 170 nm Al with RDX explosive and its effect on detonation characteristics,detonation reaction zone,and the metal acceleration ability were comprehensively investigated through a variety of experiments such as the detonation velocity test,detonation pressure test,explosive/window interface velocity test and confined plate push test using high-resolution laser interferometry.Lithium fluoride(LiF),which has an inert behavior during the explosion,was used as a control to compare the contribution of the reaction of aluminum.A thermochemical approach that took into account the reactivity of aluminum and ensuing detonation products was adopted to calculate the additional energy release by afterburn.Combining the numerical simulations based on the calculated afterburn energy and experimental results,the param-eters in the detonation equation of state describing the Nano-Al reaction characteristics were calibrated.This study found that when the 170 nm Al content is from 0％to 15％,every 5％increase of aluminum resulted in about a 1.3％decrease in detonation velocity.Manganin pressure gauge measurement showed no significant enhancement in detonation pressure.The detonation reaction time and reaction zone length of RDX/Al/wax/80/15/5 explosive is 64 ns and 0.47 mm,which is respectively 14％and 8％higher than that of RDX/wax/95/5 explosive(57 ns and 0.39 mm).Explosive/window interface velocity curves show that 170 nm Al mainly reacted with the RDX detonation products after the detonation front.For the recording time of about 10 μs throughout the plate push test duration,the maximum plate velocity and plate acceleration time accelerated by RDX/Al/wax/80/15/5 explosive is 12％and 2.9 μs higher than that of RDX/LiF/wax/80/15/5,respectively,indicating that the aluminum reaction energy significantly increased the metal acceleration time and ability of the explosive.Numerical simulations with JWLM explosive equation of state show that when the detonation products expanded to 2 times the initial volume,over 80％of the aluminum had reacted,implying very high reactivity.These results are significant in attaining a clear understanding of the reaction mechanism of Nano-Al in the development of aluminized explosives.     

Influences of different crossing types on dynamic response of underground cavern subjected to ground shock

An intersecting cavern is a common structural form used in underground engineering, and its safety and stability performance directly control the service performance of the whole project. The dynamic re-sponses of the three kinds of crossing type (+-shaped, T-shaped, L-shaped) caverns subjected to ground shock were studied by numerical simulation. The velocity plus force mode boundary setting method was proposed in the coupled static and dynamic analysis of a deep underground cavern. The results show that, among the three types of crossing caverns, the+-shaped cavern is the most significantly affected by the dynamic action, followed by T-shaped, and then L-shaped caverns. The vault settlement, straight wall deformation, vault peak particle velocity, effective plastic strain of surrounding rock, and maximum principal stress and strain at the bottom of the lining of the straight wall increase with the increase of cavern span. The vault settlement, straight wall deformation, effective plastic strain of surrounding rock, and the maximum principal stress and strain at the bottom of lining to the straight wall decrease with the increase of lateral pressure coefficient, and the peak particle velocity at the vault increases. The variation is small compared with the change of cavern span. The influence range of the underground cavern intersection is two cavern diameters from the intersection centre. The bottom of the straight wall at the intersection is the weak part. It is suggested to thicken the support locally to improve the stability of the cavern.